CATLine CAT 7A R flex
halogen-free, continuously flexible CAT 7A Industrial Ethernet Cables for Railway Technology
Marking for CATLine CAT 7 A R flex 17694431: SAB BRÖCKSKES · D-VIERSEN · CATLINE Cat.7 A R flex 4x2x24AWG 1769-4431 CE
This flexible CAT 7A industrial ethernet cable is especially for use in rail vehicles and protected installation in the interior for door control or in protecting tubes for outdoor laying at the bogie. The category 7A cable is appropriate for light and medium mechanical stress.
- continuously flexible
- no flame propagation
- flame retardant and self-extinguishing
- good oil and fuel resistance
- good acid and alkalines resistance
- good against aggressive chemicals
- suitable for outdoor installation
- fulfils fire protection requirements R15 (EL1A) and R16 (EL1B) acc. to EN 45545-2 for hazard levels HL1-3
also possible as harnessed cable with M12 or RJ 45 plug
4 x 2 x 24 AWG / 4 x 2 x 26 AWG
bare copper strands, fine wires
twisted to pairs with alu foil,
tinned copper braiding
green (similar RAL 6018)
max. 90 V
core/core 1500 V
core/screen 1200 V
fixed laying: 5 x d
flexible application: 12 x d
continuously flexible: 15 x d
fixed laying: -50°C / + 90°C
flexible application: -40°C / + 90°C
acc. to EN 50306-1 + EN 50264-1.
Development of HCl is ≤ 0,5% acc. to IEC 60754-1.
pH-value is ≥ 4,3 acc. to IEC 60754-2.
Conductivity is ≤ 10,0 µS/mm acc. to IEC 60754-2.
Fluoric content ≤ 0,1% acc. to IEC 60684-2
no flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 and EN 50305 + VDE 0260-305 section 9.1.2.
Flame retardant and self-extinguishing acc. to IEC 60332-1-2 + VDE 0482-332-1-2
acc. to IEC 61034 + VDE 0482-1034
acc. to EN 50305 + VDE 0260-305
100Ω ± 10Ω with reference to EN 50288-9-2 / CAT 7A