Individual Configuration of Connection Cables with Connectors
Connection Cables for Acceleration Sensors
>> Individual configuration of connection cables with connectors <<
Your cable combination is not shown in our catalogue connecting cables for NVH-Testing? No problem! Using the following sample configuration, you can easily configure your individual combination of cable and the required connectors yourself. We will be happy to advise you. Just contact us directly.
Configuration example:
Sensor Cable PUR ¼-28 UNF female connector - 3 x BNC male connector
2. Selection of cable
1 = TPFP
2 = PUR
3 = Silicone
insulation:
TPFP
TPFP
TPFP
outer sheath:
TPFP
PUR
Silicone
sheath colour:
blue
black
turquoise
outer diameter:
approx. 1,7 mm / approx. 2,1 mm
approx. 2,1 mm / approx. 2,5 mm
approx. 2,1 mm / approx. 2,7 mm
operating voltage:
max. 375 V
max. 350 V
max. 150 V
temperature range:
-55°C / +250°C
-40°C / +90°C (+125°C 2500h)
-25°C / +180°C
special characteristics:
resistant to high temperatures
mechanically more robust
highest flexibility
4 = multicore 4-fold
5 = multicore 8-fold
6 = multicore 16-fold
Insulation:
TPFP
TPFP
TPFP
outer sheath:
PUR
PUR
Silicone
sheath colour:
dark blue
dark blue
dark blue
outer diameter:
approx. 7,9 mm
approx. 9,0 mm (koax) / approx. 11,7 mm (triax IEPE)
approx. 11,8 mm
operating voltage:
max. 150 V
max. 350 V
max. 350 V
temperature range:
-40°C / +90°C (+125°C 2500h)
-40°C / +90°C (+125°C 2500h)
-40°C / +90°C (+125°C 2500h)
special characteristics:
highest flexibility
resistant to high temperatures
mechanically more robust
3. Connector side 1 and 2
1x =
¼-28 UNF male connector
10 =
standard 4-pin ¼-28 UNF female connector (with shortened knurled screw)
11 =
standard 4-pin ¼-28 UNF female connector
12 =
4-pin ¼-28 UNF female connector (explicitly for B&K sensors)
13 =
4-pin ¼-28 UNF male connector (explicitly for B&K sensors)
