Selection Table Torsion Cables
The selection table for torsion cables is the first decision support to choose the correct cable for your special application. On the corresponding product page you will find the technical data and characteristics. In case that you don´t find the appropriate cable solution, we are always prepared to assist you. We design and produce special cables on request of the customer that is tailor-made to your requirements and application field.
You would like to have a direct contact to our experts? Please call us or send an e-mail!
Selection table SAB Robot
Cable type | |||||
|---|---|---|---|---|---|
Application | screened |
|
| ||
Torsion angle 450°/0,5 m |
|
| |||
Torsion angle 270°/0,5 m |
|
| |||
Temperature range | + 90 °C | ⬤ | ⬤ |
|
|
+ 70 °C | ⬤ | ⬤ | |||
– 40 °C | |||||
– 50 °C |
|
| |||
Voltage | 0,14 mm² - 0,34 mm²: Peak operating voltage max. 350 V | ||||
from 0,50 mm²: Nominal voltage Uo/U 300/500 V |
| ||||
0,14 mm² - 0,34 mm²: Voltage UL/CSA 300 V | |||||
from 0,50 mm²: Voltage UL/CSA 600 V |
| ||||
0,14 mm² - 0,34 mm²: Testing voltage core/core 1500 V | |||||
0,14 mm² - 0,34 mm²: Testing voltage core/screen 1200 V |
|
| |||
from 0,50 mm²: Testing voltage core/core 2000 V |
|
|
| ||
from 0,50 mm²: Testing voltage core/core 3000 V |
|
| |||
from 0,50 mm²: Testing voltage core/screen 2000 V |
|
|
| ||
Standard | Halogen-free acc. to IEC 60754-1 + VDE 0482-754-1 |
|
| ||
Fire perfomance acc. to IEC 60332-1-2 + VDE 0482-332-1-2 | |||||
Fire perfomance acc. to UL VW-1 | |||||
Fire perfomance acc. to CSA FT1, FT2 |
| ||||
UL recognized | |||||
CSA approval |
| ||||
Characteristics | very good oil resistance acc. to EN 50363-10-2 + VDE 0207-363-10-2 |
|
| ||
very good oil resistance acc. to EN 50363-4-1 + VDE 0207-363-4-1 |
|
| |||
oilrating 60 °C acc. to UL 758, Fuel-Oil acc. to CSA C22.2 No. 210.2-M90 |
|
|
| ||
good chemical resistance |
|
| |||
very good continuous flexibility | |||||