Selection table for railway cables

The selection table for railway cables is a first step towards the right cable choice for your special application. You will find the technical data and characteristics of cables on the corresponding catalogue pages. In case that you don´t find the suitable cable we are always prepared to assist you to choose the appropriate type. On demand of our customers we design and produce special cables that correspond exactly to their demands and application range.

You would like to have a direct contact to our experts? Please call us or send an e-mail!

Cables for use in Rail Vehicles acc. to DIN EN 45545-2

Cable type			SABIX A 146 FRNC	SABIX A 156 FRNC	SABIX R 600 FRNC	SABIX R 638 FRNC	SABIX R 605 FRNC	SABIX R 615 FRNC	SABIX R 645 FRNC TP	SABIX R flex	SABIX RailLine 560	CATLine CAT 5e R CATLine CAT 6A R CATLine CAT 7A R	CATLine CAT 5e R flex CATLine CAT 6A R flex CATLine CAT 7A R flex	SABIX A 280 FRNC X	SABIX A 285 FRNC X	SABIX A 280 FRNC X (FR)	R 107	SABIX® USB 2.0 R ﬂex
Applications		Single conductor	⬤	⬤										⬤			⬤
		Multi-core cable			⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤		⬤
		screened				⬤		⬤	⬤	⬤	⬤	⬤	⬤		⬤			⬤
		Wiring cable	⬤	⬤										⬤
		Data cable					⬤	⬤	⬤
		Control cable			⬤	⬤				⬤	⬤			⬤	⬤	⬤
		Ethernet cable										⬤	⬤
		USB 2.0 cable																⬤
		cross linked type									⬤			⬤	⬤	⬤
Standards		tested acc. to EN 45545-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Halogen-free	acc. to EN 50306-1 + EN 50264-1 are fulfilled. Development of HCl is < 0,5% acc. to IEC 60754-1. pH-value is > 4,3 acc. to IEC 60754-2. Conductivity is < 10,0 μS/mm acc. to IEC 60754-2. Fluoric content < 0,1% acc. to IEC 60684-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance	No flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 and EN 50305 + VDE 0260-305 section 9.1.2. Flame retardant and self-extinguishing acc. to IEC 60332-1-2 + VDE 0482-332-1-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Flame retardant acc. to UL 1685 section 12, FT4/IEEE 1202 (NFPA 130)					⬤	⬤	⬤
		Burning test acc. to ASTM E 162-09						⬤	⬤
		Flame retardant acc. to ISO 6722 (UN/ECE R118)	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Insulation integrity in case of fire acc. to EN 50200 PH 30, VDE 0482-200, IEC 60331-21 FE 180 + VDE 0482-331-21														⬤
		Toxicity acc. to EN 50305 + VDE 0260-305	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Smoke density acc. to IEC 61034 + VDE 0482-1034	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Smoke density acc. to ASTM E 662-09						⬤	⬤
		Oil and fuel resistance acc. to EN 50264-1 + VDE 0260-264-1								⬤	⬤		⬤					⬤
		good ozone, UV and weather resistance								⬤	⬤						⬤
Temperature range fixed laying*		+ 250 °C
		+ 180 °C
		+ 125 °C
		+ 90 °C
		+ 70 °C
		– 40 °C
		– 50 °C
Voltage		Peak operating voltage max. 30 V																⬤
		Peak operating voltage max. 90 V										⬤	⬤
		Peak operating voltage: < 0,25 mm² = max. 350 V ≥ 0,25 mm² = max. 500 V					⬤	⬤	⬤
		Nominal voltage Uo/U 300/500 V	⬤		⬤	⬤				⬤	⬤			⬤	⬤	⬤
		Nominal voltage Uo/U 450/750 V		⬤
		Nominal voltage Uo/U 0,6/1 kV									⬤
		Nominal voltage Uo/U 1,8/3 kV															⬤
		Testing voltage 600 V																⬤
		Testing voltage 1500 V					⬤	⬤	⬤			⬤	⬤
		Testing voltage 2000 V	⬤							⬤	⬤			⬤	⬤	⬤
		Testing voltage 2500 V		⬤
		Testing voltage 3000 V			⬤	⬤
		Testing voltage 4000 V									⬤
		Testing voltage 6500 V															⬤

from
to

short-time use

* The temperature range for flexible application is mentioned on the corresponding catalogue page

Selection table for railway technology

Questions about our products?

Selection table for railway cables

Highly flexible cables according to your special requirements