Selection table halogen-free cables

Safe and halogen-free – cables for the most demanding requirements
Halogen-free cables and wires are indispensable in safety-critical applications, e.g., in public buildings, traffic engineering, or industrial plants. They are characterized by high safety in the event of fire, as they do not emit corrosive or toxic gases. This means they make a decisive contribution to protecting people and equipment.

Selection table with product links – quickly find the right cable
The selection table shows the most important properties of our halogen-free cables at a glance. It includes information on the structure and design (single or multi-core cable, shielded or twisted pair) as well as the voltage ranges (300/500 V to UL/CSA 1000 V). The focus is on safety-related criteria such as burning behavior, flame resistance, smoke density, toxicity, corrosiveness of fire gases, and fire propagation (IEC 60332, IEC 60754, IEC 61034, EN 45545-2, NFPA 130). Finally, the table specifies the temperature ranges so that the reliability of the cables can be assessed under different operating conditions.

Clicking on the products or points takes you directly to the product pages with technical details and downloads – for quick and precise cable selection. On request, we can also develop and produce a customized special cable that is precisely tailored to your application. Would you like to speak to us directly? Simply contact us by phone or email.

Comparison table and selection guide for halogen-free cables and wires:

Cable type		SABIX A 146 FRNC	SABIX A 156 FRNC	SABIX A 166 FRNC	SABIX A 147 FRNC	SABIX A 157 FRNC	SABIX A 100 HT	SABIX A 101 HT	SABIX A 200 FRNC	SABIX A 205 FRNC	SABIX A 224 FRNC C1	SABIX A 226 C FRNC C1	SABIX A 238 FRNC	SABIX A 260 PUR	SABIX A 130 HT	SABIX CC 625 FRNC M	SABIX CC 625 S FRNC M	SABIX CC 625 SH FRNC M	SABIX A 810 FRNC	SABIX A 812 C FRNC	SABIX D 305 FRNC	SABIX D 315 FRNC	SABIX D 320 FRNC C1	SABIX D 345 FRNC TP
Basic construction	Single conductor	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	screened											⬤	⬤				⬤	⬤		⬤		⬤	⬤	⬤
	coloured cores									⬤					⬤						⬤	⬤	⬤	⬤
	numbered cores								⬤		⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	twisted pairs																						⬤	⬤
	inner sheath																	⬤		⬤
Temperature range fixed laying*	+ 220 °C
	+ 90 °C
	+ 85 °C
	– 30 °C
	– 40 °C
	– 50 °C
Voltage	Peak operating voltage: < 0,25 mm² = max. 350 V ≥ 0,25 mm² = max. 500 V																				⬤	⬤	⬤	⬤
	Nominal voltage Uo/U 300/500 V	⬤			⬤		⬤	⬤	⬤	⬤			⬤	⬤	⬤		⬤	⬤	⬤
	Nominal voltage Uo/U 450/750 V		⬤			⬤					⬤	⬤
	Nominal voltage Uo/U 0,6/1 kV			⬤															⬤	⬤
	Voltage UL resp. CSA 600 V				⬤											⬤	⬤	⬤
	Voltage UL resp. CSA 1000 V					⬤
	Testing voltage 1500 V																				⬤	⬤	⬤	⬤
	Testing voltage 2000 V	⬤			⬤		⬤	⬤							⬤
	Testing voltage 2500 V		⬤			⬤						⬤
	Testing voltage 3000 V			⬤					⬤	⬤	⬤		⬤	⬤		⬤	⬤	⬤
	Testing voltage 4000 V																		⬤	⬤
Standards	Halogen-free acc. to IEC 60754-1 + VDE 0482-754-1	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance: No flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 Cat. C resp. D			⬤	⬤	⬤			⬤	⬤	⬤	⬤	⬤			⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance: No flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 and EN 50305 + VDE 0260-305 section 9.1.2	⬤	⬤
	Fire performance: Flame retardant and self-extinguishing acc. to IEC 60332-1-2 + VDE 0482-332-1-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤		⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance acc. to NF C 32-070 C1										⬤	⬤											⬤
	Fire performance acc. to CSA FT1															⬤	⬤	⬤
	Corrosiveness of conflagration gases: In compliance with IEC 60754-2 + VDE 0482-754-2 - no development of corrosive conflagration gases	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤		⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Smoke density acc. to IEC 61034 + VDE 0482-1034	⬤	⬤	⬤	⬤	⬤			⬤	⬤	⬤	⬤	⬤			⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	UL recognized, CSA approved				⬤	⬤											⬤	⬤	⬤
Special features	very good oil resistance acc. to EN 50363-10-2 + DIN VDE 0207-363-10-2													⬤
Special features	good chemical resistance													⬤

Cables for use in Rail Vehicles acc. to DIN EN 45545-2

Cable type			SABIX R 600 FRNC	SABIX R 638 FRNC	SABIX R 605 FRNC	SABIX R 615 FRNC	SABIX R 645 FRNC TP	SABIX R flex	SABIX RailLine 560	SABIX A 280 FRNC X	SABIX A 285 FRNC X	SABIX A 280 FRNC X (FR)
Applications		Single conductor								⬤
		Multi-core cable	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		screened		⬤		⬤	⬤	⬤	⬤		⬤
		Wiring cable								⬤
		Data cable			⬤	⬤	⬤
		Control cable	⬤	⬤				⬤	⬤	⬤	⬤	⬤
		cross linked type							⬤	⬤	⬤	⬤
Standards		tested acc. to EN 45545-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Halogen-free	acc. to EN 50306-1 + EN 50264-1 are fulfilled. Development of HCl is < 0,5% acc. to IEC 60754-1. pH-value is > 4,3 acc. to IEC 60754-2. Conductivity is < 10,0 µS/mm acc. to IEC 60754-2. Fluoric content < 0,1% acc. to IEC 60684-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance	No flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 and EN 50305 + VDE 0260-305 section 9.1.2. Flame retardant and self-extinguishing acc. to IEC 60332-1-2 + VDE 0482-332-1-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Flame retardant acc. to UL 1685 section 12, FT4/IEEE 1202 (NFPA 130)			⬤	⬤	⬤
		Burning test acc. to ASTM E 162-09				⬤	⬤
		Flame retardant acc. to ISO 6722 (UN/ECE R118)	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Insulation integrity in case of fire acc. to EN 50200 PH 30, VDE 0482-200, IEC 60331-21 FE 180 + VDE 0482-331-21										⬤
		Toxicity acc. to EN 50305 + VDE 0260-305	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Smoke density acc. to IEC 61034 + VDE 0482-1034	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
		Smoke density acc. to ASTM E 662-09				⬤	⬤
		Oil and fuel resistance acc. to EN 50264-1 + VDE 0260-264-1						⬤	⬤
		Ozone, UV and weather resistance						⬤	⬤
Temperature range fixed laying*		+125 °C
		+ 90 °C
		– 40 °C
		– 50 °C
Voltage		Peak operating voltage: < 0,25 mm² = max. 350 V ≥ 0,25 mm² = max. 500 V			⬤	⬤	⬤
		Nominal voltage Uo/U 300/500 V	⬤	⬤				⬤	⬤	⬤	⬤	⬤
		Nominal voltage Uo/U 0,6/1 kV							⬤
		Testing voltage 1500 V			⬤	⬤	⬤
		Testing voltage 2000 V						⬤	⬤	⬤	⬤	⬤
		Testing voltage 3000 V	⬤	⬤
		Testing voltage 4000 V							⬤

Cables for Shipbuilding

Cable type		SABIX BL 405 FRNC	SABIX BL 415 C FRNC	SABIX BL 443 C FRNC TT	SABIX BL 445 C FRNC TP	SABIX BL 446 C FRNC FTP	SABIX BL 400 FRNC	SABIX BL 438 C FRNC	SABIX BL 402 FRNC	SABIX BL 408 FRNC	SABIX BL 409 C FRNC	SABIX BL 410 FRNC	SABIX BL 412 C FRNC
Construction	Data cable	⬤	⬤	⬤	⬤	⬤
	Control cable						⬤	⬤
	Power cable								⬤	⬤	⬤	⬤	⬤
	screened		⬤	⬤	⬤	⬤		⬤			⬤		⬤
	twisted pairs				⬤	⬤
	twisted triple			⬤
Temperature range fixed laying*	+ 90°C
Temperature range fixed laying*	– 40°C
Voltage range	Peak operating voltage max. 300 V			⬤		⬤
	Peak operating voltage max. 350 V	⬤	⬤		⬤
	Nominal voltage Uo/U 300/500 V						⬤	⬤
	Nominal voltage Uo/U 0,6/1 kV								⬤	⬤	⬤	⬤	⬤
	Testing voltage 1500 V	⬤	⬤	⬤	⬤	⬤
	Testing voltage 2000 V						⬤	⬤
	Testing voltage 4000 V								⬤	⬤	⬤	⬤	⬤
Standards	Halogen-free acc. to IEC 60754-1 + VDE 0482-754-1	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance: no flame propagation acc. to IEC 60332-3-22 + VDE 0482-332-3-22 Cat. A	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Fire performance: flame retardant and self-extinguishing acc. to IEC 60332-1-2 + VDE 0482-332-1-2	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Corrosiveness of conflagration gases: In compliance with IEC 60754-2 + VDE 0482-754-2 - no development of corrosive conflagration gases	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
	Smoke density acc. to IEC 61034 + VDE 0482-1034	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
Type approvals	DNV	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤	⬤
Characteristics	flexible conductor stranding	⬤	⬤	⬤	⬤	⬤	⬤	⬤				⬤	⬤
Characteristics	extended cross section range	⬤	⬤		⬤

continuously flexible with highest fire protection

Cable type		SABIX SD 705 FRNC C1	SABIX SD 715 C FRNC C1	SABIX SD 745 C FRNC C1 TP	SABIX S 710 FRNC C1	SABIX S 712 C FRNC C1
Construction	Data cable	⬤	⬤	⬤
	Control cable				⬤	⬤
	screened		⬤	⬤		⬤
	twisted pairs				⬤
Temperature range fixed laying*	+ 90 °C
Temperature range fixed laying*	– 40 °C
Voltage range	Peak operating voltage < 0,25 mm² = max. 350 V ≥ 0,25 mm² = max. 500 V	⬤	⬤	⬤
	Nominal voltage 0,6/1 kV				⬤	⬤
	Testing voltage 1500 V	⬤	⬤	⬤
	Testing voltage 4000 V				⬤	⬤
Standards	Halogen-free acc. to IEC 60754-1 + VDE 0482-754-1	⬤	⬤	⬤	⬤	⬤
	No flame propagation acc. to IEC 60332-3-24 + VDE 0482-332-3-24 resp. IEC 60332-3-25 + VDE 0482-332-3-25 Cat. C resp. D	⬤	⬤	⬤	⬤	⬤
	Flame retardant and self-exstinguishing acc. to IEC 60332-1-2, VDE 0482-332-1-2 + NF C 32-070 C1	⬤	⬤	⬤	⬤	⬤
	Fire performance acc. to NF C 32-070 C1	⬤	⬤	⬤	⬤	⬤
	Corrosiveness of conflagration gases: In compliance with IEC 60754-2 + VDE 0482-754-2 - no development of corrosive conflagration gases	⬤	⬤	⬤	⬤	⬤
	Smoke density acc. to IEC 61034 + VDE 0482-1034	⬤	⬤	⬤	⬤	⬤
	Toxicity acc. to EN 50305	⬤	⬤	⬤	⬤	⬤
	Oil and fuel resistance acc. to EN 50264-1 + VDE 0260-264-1	⬤	⬤	⬤	⬤	⬤
	good UV, ozone and weather resistance	⬤	⬤	⬤	⬤	⬤
	good mycological resistance	⬤	⬤	⬤	⬤	⬤

from
to

* The temperature range for flexible application is mentioned on the corresponding catalogue page

Selection table for halogeen-free cables

Questions about our products?

Selection table halogen-free cables

Highly flexible cables according to your special requirements